Create Manufactured Part
Explanation
This activity is used to create and connect a design part to a design object
to be prefabricated. As a result of this activity, an inventory part is created
with a part number and connected to the design part, and will be of the
manufactured part type, by default. This activity is useful when a design part has not been connected to
the design object, but the design object is required to be manufactured via a
shop order. The above scenario is quite common with isometric structures or
design objects imported from an external design tool. By default, both the
Design Part ID and Part No will have the same identification as the design
object, but it is possible to modify these values according to your requirement.
Prerequisites
- The design object should not have a connected design part.
- The design object class should be defined with the Can have design
part class relation
System Effects
A design part is connected to the design object. Simultaneously, an inventory
part of the manufactured part type is created, by default, and connected to the design part.
Window
Design Object Work Preparation
Related Window Descriptions
Design Object Work
Preparation
Create Manufactured Part
Procedure
- Open the Design Object Work Preparation
window.
- Search for the design object to which you want to connect a design part.
- Right-click on the header and click Create Manufactured Part.
- In the Design Part Class field, select the class to which the
design part to be created will belong, from the list. The classes available
are those for which design parts have been enabled to be design parts for
the class of the design object.
- In the Design Part ID field, enter the ID of the design part to
be created. By default, this is the ID of the design object but can be
modified.
- In the Design Part Description field, enter the
description of the design part to be created. By default, this is the
description of the design object but can be modified.
- In the Site field, enter the site of the design part. By default,
this is your default site.
- In the Part Number field, enter the part number of the design
part, to be created. By default, this is the ID of the design object but can
be modified. The value in the Inventory Part field is
Manufactured, by default.
- Click OK.