Unrelease CRO Line

Explanation

This activity is used bring a released repair line back to Reserved status. When doing un-release the reservation is brought back from the repair order to the  repair line, and the repair order is canceled. The status is changed to Reserved and it is possible to perform required changes and/or updates which preceded the un-release of the line. When all conditions are adjusted you can continue to process the component repair order line. Release the line to repair again and a new repair order is created.

Prerequisites

• A repair line must exist in Released status.
• No transactions can exist on the repair order.

System Effects

The following system effects will take place as a result of this activity:

• The status of the repair line is updated to Reserved.
• The reservation is disconnected from the repair order and connected to the repair line.
• The repair order is canceled.

Window

Component Repair Order Lines
Component Repair Order

Related Window Descriptions

Component Repair Order Lines
Component Repair Order/Repair Lines
Component Repair Order

Procedure

1. Open the Component Repair Order window and search for your component repair order.
2. Click the Repairs tab and select a released component repair order line.
3. Right-click and then click Unrelease.
4. The status of the component repair order line is changed to Reserved and the repair order is canceled.