Verify Work Scope Tasks for Shop Visit

Explanation

Use this activity to verify all the modification tasks and the LLP (Life Limited Part) tasks included in the work scope, by using the Work Scope Configurator.

To make sure that all the affected parts of the modifications are included in the work scope, the On Condition Modification Report has been introduced. It contains a list of all the parts affected by the current maintenance level, and the modifications that are set to On Exposure in the customer modification baseline. The report can be used only after the maintenance levels have been defined. The report can be started in the Define Work Scope window.  

Prerequisites

• The IFS/Vehicle Information Management tasks must be selected to be included in the work scope in IFS/Vehicle Information Management Task Summary. When you save, these rows will be included into the work scope and will appear in the Work Scope Configurator. 

System Effects

•  The included IFS/Vehicle Information Management tasks will be available for Work Scope planning.

Window

Define Work Scope

Related Window Descriptions

Define Work Scope/Work scope tasks  
Define Work Scope/Define Work Scope/Affected Part Tasks

Procedure

1. Check whether all the modifications are correctly entered in the work scope.
2. Check whether all the affected parts, relating to the modifications, are correctly entered in the work scope.
3. Check whether all the LLPs are correctly entered in the work scope, also as an affected part to it self.
4. After the maintenance levels are defined, a report should be generated to see if all the On Exposure modifications are included in the work scope.