Change Operational Status

Explanation

Use this activity to change the operational status for a functional or serial object.

Prerequisites

Before entering mandatory object information, an object must have been created. The prerequisites for setting the object to specific statuses are shown on the following table.

Object Type, Operational Condition (if applicable)	Operational Status
Object Type, Operational Condition (if applicable)	In Operation	Out of Operation	Scrapped
Serial object, Operational	Can change to: Out of Operation	Can change to: In Operation	N/A
Serial object, Non Operational	N/A	Can change to: Scrapped	Can change to: Out of Operation
Functional object	Can change to: Out of Operation	Can change to: In Operation Scrapped	Can change to: Out of Operation

System Effects

As a result of this activity, the operational status for the object will change. If you change the status to:

In Operation, you can use the object, enter history data for it and create entries for it in the operational log.
Out of Operation, the object is temporarily out of use due to activities such as routine maintenance, repair, management decision, or lack of need. It is possible to plan any maintenance activities for the object with this status.
Scrapped, you cannot use the object.

Window

Functional Object
Serial Object

Related Window Descriptions

Functional Object
Serial Object

Procedure

Open the Functional Object or Serial Object windows, create a new record (F5) or query for an existing one (F3).
Right-click, point to Operational Status and click one of the following right mouse button options: .

In Operation

Out of Operation

Scrapped