Assign Part Revisions to Maintenance Program
Explanation
This activity is used to assign part revisions to a maintenance program. When
a serial part is assigned to a maintenance program, all existing revisions
of the serial part will be assigned to the maintenance program by default.
In addition, you can connect a new part revision to an active maintenance
program, provided that the part to which the new revision belongs is already
assigned to the maintenance program.
Prerequisites
Serial parts must have been assigned to the maintenance program prior to
assigning part revisions.
System Effects
- The assigned serial part revision(s) will be valid to use for the maintenance
program.
- Serials having part numbers and revisions defined for the maintenance
program may be linked to the maintenance program.
- If you have connected a new part revision to the active maintenance
program, this revision is now valid to use for the maintenance program.
Window
Define
Maintenance Program
Related Window Descriptions
Define Maintenance Program
Define Maintenance Program/Assign Part Revision
Add Part Revision
Procedure
Follow this procedure to add or remove part revisions for a maintenance
program that is in the Preliminary status:
- Open the
Define Maintenance Program window and query (F3)
for your maintenance program revision.
- (Optional step) Click the
Assign Parts tab and observe information on the
part(s) that have been assigned to the maintenance program.
- Click the
Assign Part Revisions tab. Observe that all part
revisions for the assigned part(s) have been added to the maintenance
program.
- If you want to remove a part revision, select the row and then click
Remove.
If you have created a new part revision for a serial already assigned to
a maintenance program, and this new part revision is to be added to the
maintenance program which is in the Preliminary status;
- create a new record (F5).
- In the Part Number field, enter the part number of the assigned
part. Use the List of Values to select the value.
- In the Part Revision field, enter the new part revision. Use the
List of Values to select the value.
- Save the record (F12).
Follow this procedure to add a new part revision to a maintenance program
that is in the Active status:
- Open the
Define Maintenance Program window and query (F3)
for your maintenance program revision.
- Click the
Assign Part Revisions tab.
- Select the row that contains the serial part to which the new part
revision belongs, right-click and then click Add Part Revision. The
Add Part Revision dialog box opens.
- The part number of the serial part is displayed in the Part Number
field by default.
- In the Part Revision field, enter the new part revision. Click
List to select the value.
- Click OK. The
Assign Part Revisions tab is updated
with the new serial part revision.