Reverse Separate Template
Explanation
This activity is used to reverse the settings that control the configuration
of a certain component part by another template.
During the design of a
template structure you may have selected the
Configured
in Separate Template check box in order to control the configuration of a
certain structure entry by a separate template. It is possible to reverse
the configuration of a separate template provided that the following
prerequisites are fulfilled.
Prerequisites
- The template must be
in the Preliminary
status.
-
The structure position must be on the lowest level in the structure (i.e. cannot
have any child parts).
System Effects
- As a result of this activity, the configuration of a separate template for the
selected part is reversed.
Window
Serial
Structure Template
Template Structure
Navigator
Related Window Descriptions
Serial Structure Template
Serial Structure
Template/Consist Of
Template Structure Navigator
Template Structure
Navigator/Consist Of
Procedure
- Open the
Serial Structure Template or
Template
Structure Navigator window and query (F3) for the necessary template
structure.
- Click the
Consist Of tab. To move down the structure,
select the row, right-click, and then click Next Level until the
required serial part is displayed in the tab.
- Select the row that contains the part you want, right-click, and then
click Reverse Separate Template.
- As a result, the separate template configuration is reversed for the
selected structure item. Observe that the Configured in Separate
Template check box is cleared for the selected record.