Move Non-Serial Part to Inventory

Explanation

Use this activity to move the non-serial part from a workshop to inventory. The purpose with moving a non-serial part to inventory is to replace non-serial with another, e.g., when broken.

In the Aviation industry, it is a requirement that all components and assemblies that are not installed in a structure are accompanied with a tag that can be used to clearly identify the component or assembly and its current status. This tag, referred to as a serviceability tag, provides detailed information on the status of the component such as serviceability and its origins. Through this activity, you can choose to print the tag report when moving the non-serial object to inventory. 

Prerequisites

Before a non-serial part is moved to inventory, the following must have been completed:

• The repair work order must be created and retrieved in the window.

System Effects

• The non-serial object is moved to inventory.
• If the Print Serviceability Tag check box is selected, the serviceability tag is printed in the serviceability status you entered for the part.

Window

Report In Work Order

Related Window Descriptions

Move Non Serial to Inventory
Print Serviceability Tag

Procedure

Use the following procedure to move a non-serial part to inventory:

1. Open the Report In Work Order window and query (F3) for your work order number.
2. Click the Report In tab.
3. Right-click and click Move Non-Serial to Inventory. The Move Non-Serial to Inventory dialog box opens.
4. General information on the object to be moved is displayed in the upper part of the dialog box.
5. In the Location No field, enter the inventory location to which the part is to be moved. Click List to select a valid value.
6. Select the Print Serviceability Tag check box to order and print the serviceability tag report for the non-serial part which is being moved to inventory. Note: If the value of the PRNT_SERVICE_TAG_ACS object property (System LU Values/Object Property) is set to TRUE, this check box will be selected by default. The value of this check box can be changed, if needed.
7. Click OK.
8. The Print Serviceability Tag dialog box opens.
9. In the Serviceability Status list, select the relevant serviceability status for which the serviceability tag is to be printed.
10. Click OK.